Versions Compared

Old Version 54

changes.mady.by.user Gunnar Andersson

Saved on

compared with

New Version 55

changes.mady.by.user Dmitry Morozov

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

(lightbulb) REQ-3:   The VIRTIO_GPU_F_VIRGL flag, described in chapter 5.7.3 in [VIRTIO-GPU], SHALL NOT be set.

(lightbulb) REQ-4:  The VIRTIO_GPU_F_EDID flag, described in chapter 5.7.3 in [VIRTIO-GPU], MUST be set and supported allow the guest to use display size to calculate the DPI value.

        Device configuration layout.

(lightbulb) REQ-45:   The implementation MUST use the device configuration layout according to chapter 5.7.4 in [VIRTIO-GPU].

(lightbulb)      REQ-45.1: The implementation SHALL NOT touch the reserved structure field as it is used for the 3D mode.

        Device Operation.

(lightbulb) REQ-56:   The implementation MUST suport the device operation conceprt (the command set and the operation flow) according to chapter 5.7.6 in [VIRTIO-GPU].

(lightbulb)      REQ-56.1: The implementation MUST support scatter-gather operations to fulfil the requirement in chapter 5.7.6.1 in [VIRTIO-GPU].

(lightbulb)      REQ-56.2: The implementation MUST be capable  to perform DMA operations to client's attached resources to fulfil the requirement in chapter 5.7.6.1 in [VIRTIO-GPU].

        VGA Compatibility.

(lightbulb) REQ-67:   VGA compatibility, as described in chapter 5.7.7 in [VIRTIO-GPU], is optional.

...


REQ-TBD: * The device must implement support for the VIRTIO_GPU_CMD_RESOURCE_CREATE_V2 as described in [VIRTIO-FUTURE]

...