This contains meeting minutes.  If meetings are cancelled this would be noted here.  Some dates are missing minutes but ideas are always captured on the main project pages here.

Minute takers according to this page 

February 12th, 2019

Participants:

• Bernhard Rill (taking minutes)
• Philippe Robin
• Gunnar Andersson
• Dimitri Morozov
• Vasco Fachin
• Kai Lampka
• Erik Jaegervall

Agenda:

• Date for SBSA presentation from Arm
• API standardization / virtual platform definition / Backlog refinement and planning
• (Topics intro and table summary here)
• (draft spec work here)
• different timeslot for a call that Anup can join for the watchdog discussion.
• Access to ArmV8.4 Trustzone API specification (Secure Partition Interface specification)
• Events

Minutes:

• Date for the SBSA presentation is 05^th of March. Charles Garcia from Arm is going to execute this presentation. Exact timeslot will be defined based on the doodle from Gunnar (note below)
• API standardization:
  
  • Dmitry mentioned that OpenSynergy is working on an Audio implementation (they evaluate if they can transfer Audio frames via VirtIO)
    • It might be that OASIS is working in this area. It might be good that OpenSynergy gets in contact with them.
  • EPAM Artem has summarized the sensors section. Feedback from the team is needed
  • USB: Vasco mentioned that a full virtualization of an USB is very hard; it might be desirable to setup a pass-through device
    • What are the use-cases which would lead towards a need to fully virtualize an USB? TBD
    • Limiting factors for a full virtualized USB are
      
      • complexity of the USB (DMA support)
      • Security
    • Action item Vasco is going to summarize his view on USB in the summary table
  • Bluetooth virtualization is most likely not needed
  • Memory ballooning is as well out of scope
  • Gunnar has updated the chapters network, cryptography and text console. Feedack is welcome!
• Different timeslot for a call that Anup can join for the watchdog discussion.
  • Action item Gunnar will send a Doodle link
• Access to ArmV8.4 Trustzone API specification (Secure Partition Interface specification)
  • let Bernhard know if you would like have access to this specification (under NDA)
• Events: 
  • Embedded world
  • GENIVI AMM Munich
    
    

February 5, 2019

Participants:

• Franz Walkembach (taking minutes)
• Philippe Robin
• Gunnar Andersson
• Dimitri Morozov
• Vasco Fachin
• Andreas Prosell
• Artem Mygaiev
• Erik Jaegervall
• Vivek Galatage
• Matt Spencer
• Stephen Lawrence

apologies

• Kai

Agenda:

• Review previous week's minutes
• Virtualization talks at the FOSDEM conference
• API standardization / virtual platform definition
• Backlog refinement and planning

• (Topics intro and table summary here)
• (draft spec work here)

Minutes:

• Introduction of workgroup members and available content to the new team members
• Review of last meeting minutes
• Looking for RISC-V knowledgeable persons at Genivi
• It was stated that RISC-V might be a good member for Genivi, but currently not important for the HV workgroup
• AMM in Munich in May is approaching quickly
• Gunnar gave feedback on the FOSDEM conference (link in Wiki) on 2 and 3 February in Brussels with some presentations on virtualization topics and tools, secure boot, virtual IOMMU implementation using HW nested paging. Virt audio by Red Hat
  
  • Please have a look at the videos and content where interested.

  • Fosdem tracks - recommended readings

    • virtualization and IaaS track - look in particular at

      • Getting To Blinky: Virt Edition
        Making device pass-through work on embedded ARM

      • Virtual IOMMU Implementation using HW Nested Paging

    • Software Defined Networking track - look in particular at

      • An update on Virtio
        What happened recently and what's coming soon?

• Artem: one update I wanted to share - finally Linaro OP-TEE (FOSS implementation of secure OS and environment for ARM Trust Zone) have just merged support for virtualization of guests running Trusted Applications that we've developed @EPAM & Xen Project: https://github.com/OP-TEE/optee_os/pull/2370, this allows native execution of TAs and can be included in spec
• Draft of virtual platform definition, API and synergy document created by Gunnar, incl. auto requirements and scoping. Gunnar will post it on the Wiki for people that are interested
• Erik is working on a group at Bosch focussing on security and was wondering how security influences the HV work group. We should work on a top level feature overview.
• Andreas at Luxoft with PELUX open source platform that might include hypervisor technology including shared graphic functionality.
• Vivek will investigate the work group content and get back with topics
• Gunnar highlighted the contribution need to make the group successful
• Philippe reminded all to propose topics for the AMM in May

January 29, 2018

Participants:

• Gunnar Andersson
• Artem Mygaiev
• Bernhard Rill
• Christian Schulenberg
• Dmitry Morozov
• Franz Walkembach
• Kai Lampka
• Matt Spencer
• Philippe Robin

Minutes

• Last week's meeting review. Franz: RISC-V consortium and GENIVI board cooperation should be discussed. Gunnar sees no issue in trying new hardware architecture in the technical project, and GENIVI organization is generally hardware-independent.  Gunnar requests appropriate contact (from Franz), especially if someone works on Virtualization technologies.
• Participation. No updates from Green Hills regarding a new participant → We have not reached out to our contacts, Philippe will do it.   Anup has a conflict on this time slot but wants to participate via email.  Gunnar proposes to shift the meeting (some of the time, not all of the time), for Anup, but also (maybe a different shift) to allow people from the US to participate.
• SEL2.
  • Bernard: API specification (alpha revision) is about to be released. It will be accessible only under NDA. Artem proposes to create an internal review team.
  • Bernard could invite colleagues  to discuss SBSA (possibility to join in two weeks or so).
• Draft specification. Gunnar: Last week I felt we did not have full agreement on what we want to achieve. The project description I will show later is one input to that discussion.
• Come up with ideas for tech presentations for AMM meeting in Munich (May 14-16). Two weeks deadline has been proposed.
• PV IO interface by Xen as an alternative to VirtIO. Artem proposes the topic for discussion. No documents with description so far. Artem is to share related links.

• Reviewing Virtual Device Categories table. No progress. We need to clarify VM responsibilities. 

• Also we need to convince people from OEMs to participate. We need requirements in general regarding usage of hypervisors in automotive.

  • Gunnar agrees, but proposes that we also know fairly well (as suppliers) the generalized use-cases and needs on a high level.  It is unfortunate but should not make us stop completely.

• From interest to participation. Gunnar introduces the Project description: a high level idea of requirements and respective solutions. OCI as an example. Everyone is welcome to read and give some feedback. Franz asks about the list of VMs (OSes) we want to support. Gunnar: Any OSes that are in the scope of automotive industry (for example Linux (multiple variations), Android, QNX, INTEGRITY, AUTOSAR Adaptive).

January 22, 2019

Participants:

• Gunnar Andersson
• Artem Mygaiev
• Kai Lampka
• Philippe Robin
• Dmitry Morozov
• Franz Walkembach
• Bernhard Rill

Minutes

1. Franz suggested GENIVI community looking at RISC V architecture – this might become a production grade at some point
2. Gunnar goes over last call’s minutes
3. GHS: Nikola cannot join anymore because he changed position, GHS said they are interested in continuing their participation to the work
4. Bernhard don’t have updates on SEL2 / SP805 yet
   1. Mentioned that discussion can happen with ARM engineers on WDT – but this is part of “supervisor” not hypervisor. This can be reviewed in scope of SBSA
   2. SEL2 – maybe some spec updates? Not yet
5. Gunnar pointed out the need to take time schedules more aggressively
   1. Philippe suggested to use May 14-16 AMM in Munich as a milestone for some 1st version release and holding technical workshop on virtualization & spec review
   2. Gunnar requests for topics/proposals for presentations on GENIVI AMM (Artem wants to suggest reviewing pvif as alternative to virtio)
6. Reviewing Virtual Device Categories table yet
   1. Block storage – no updates yet from Kai, Gunnar is reviewing goals and approach. One of the main un-covered topics is “automotive-grade persistency management” – does this imply some requirements on hypervisor level? Artem – hypervisor just shall not interfere. Gunnar – there may be 2 approaches: write-through with “privileged” processes or going through all system layers as usual. Kai – write down the requirements. Discussion continues into discussing API stability for all scenarios. Gunnar – does virtio provide everything needed for technical implementation of abovementioned? Kai – no, probably not, it does not allow applying policy, etc. Need to define what is missing, requirements, etc. From example of 2D GPU, Kai is asking – from this table it is not clear if virtio fits requirements. Gunnar – requirements must be checked against virtio spec. Kai – requirements as of now implying some design choices which may not be correct. Gunnar – yes, but requirements are there to support different implied designs, not to enforce them. Goal is to make a generic specification which can be tailored for a target system.

January 15, 2019

Participants:

• Dmitry Morozov (OpenSynergy)
• Artem (EPAM)
• Gunnar (GENIVI)
• Bernhard Rill (ARM)

Minutes

Fairly short sync up on a few topics and planning the work going forward.

Gunnar: I'm thinking of writing a short introduction chapter for SCMI to make the proposal more concrete.  Hopefully this sparks feedback and it's an important chapter.

Artem: SCMI is being updated by ARM. So we should take that into account.
I think we should participate in that kind of spec update.

Bernhard joining...

Bernhard: I can find the right contact people for this.

Artem: Is there any updates on security?
...like SEL2 implementation for ARMv8

Artem: For your information we just upstreamed to OPTEE and to TrustZone support for previous architectures.

Bernhard: On the Watchdog topic:
...The SBSA, Server Based Systems Architecture, includes Watchdog info that could be relevant.
...I can find a team from ARM to give more information about this.

Artem: Is SBSA only for enterprise domain?

Bernhard: No we write it independently. It is part of the architecture itself.

Gunnar: I notice Anup's intro text links to an ARM spec on the watchdog part but that linked document seems chip-specific (I mean ARM-architecture
specific). I think for a cross-platform specification we're looking for something slightly different.

Gunnar: Of course wherever we end up seeing platform differences for a feature, that may be an outcome as well
...if common abstraction is not appropriate for some reason. The important thing is to clarify this and document it.

CES:

Some reflections...  What was most shown and discussed at CES? (Autonomous vehicles)
and what was the most interesting for you (Gunnar:  For me 1000+ people in GENIVI/NAB showcase event.  Not the easiest
place for good business discussions (loud) but it's a fun big meetup place at least.).  Also, LGE keynote.

December 11, 2018

Participants:

• Kai Lampka (Elektrobit)
• Alex Agizim (EPAM)
• Kamalakkannan Natar... (Bosch)
• Anup Patel (XVisor)
• Dmitry Morozov (OpenSynergy)
• Philippe (GENIVI)
• Gunnar (GENIVI)
• Matt Spencer (ARM)
• Vasco Fachin (Bosch)

Notes from HV meeting 2018-12-11

Gunnar: Did you perform the action to decide on support (or not) for SCMI-for-sensors proposal?

... SCMI being discussed in OpenSynergy

Dmitry: ...comppany working to form an opinion, will come back.
Dmitry: It seems to be more features on backends side clocks and power domains
...Is SCMI an appropriate protocol
Gunnar: Yes, the specification itself highlights those features. The proposal that this will be repurposed as a standard sensors API is the new idea.

Kai: Not so much focus on that right now
Kai: feedback and a review should be possible

Alex: ... need to give feedback
Alex - noo need for input because EPAM

Gunnar: SCMI - more comments?

Matt: I'd rather have Bernhard comment on it.

Vasco: I need to look into this. Kind of a new topic.

Gunnar: Still open question for me is Intel suppt? I'd consider contacting ACRN project as a start.

Matt: I'd like to think that it can be adopted by Intel, will check if we have had any feedback.
Will check with Bernhard Rill.

Virtualization spec

Dmitry's input:

SHALL/MUST Reuse definitions from VIRTIO

Gunnar: I notice a mix of terms here.
Dmitry: Yes, shall and must are the same thing.

MUST seems to be used as positive and SHALL NOT used as negative (in VIRTIO)

Discussion with Kai on block device

Some features might not be covered by VIRTIO in enough detail.

Kai: trim command is worthwhile to describe.

Gunnar: OK can we then try this as a start - describe trim command in
detail, specification, could be requirements... It should be concrete -
we're writing a specification...

Gunnar: I want to get the AGL review off the backlog, it's been open long
enough. Please read the paper, figure out what is useful / not useful in
the context we are working. Just like source code we should reuse already
done work.... (Just like others may reuse what we produce in the virt
platform spec).

Gunnar: More from backlog - the architecture & requirements work thread has stopped because of lack of input and previous driver Sriram is busy.

Gunnar: Have you looked at this within Bosch?  Vasco?

Vasco:  I will consider this

- Architecture
- Use case
- Requirements

Gunnar: You can address it from any angle you like of the above 3, it will lead to the kind of results we mean here.

Action (all): AGL paper read through (again), see links

December 4, 2018

Participants:

• Kai Lampka (Elektrobit)
• Kamalakkannan Natar... (Bosch)
• Anup Patel (XVisor)
• Dmitry Morozov (OpenSynergy)
• Philippe
• Gunnar
• Bernhard Rill (ARM)

Minutes (TBD)

• ...Lots of discussion on block devices and realization of automotive persistence requirements in a full system.

November 27, 2018

Participants

• Bernhard
• Franz
• Artem
• Alex
• Vasco
• Dmitry
• Gunnar

Dmitry: I have written 2D and 3D graphics requirements on the Specification draft page.

Reviewing Dmitrys input...

Dmitry: 2D is quite clear
Gunnar: The 2D chapter references VIRTIO 1.0 from 2015. Is it up to date?
Dmitry: Yes, I think so. Not much change (in 2D area)
Dmitry: VIRTIO-VIRGL - empty reference for now. There is no spec to point to yet. I can only refer to kernel source etc.
...hope to see something coming here.

Gunnar: Great start, comprehensive and detailed work!
Gunnar: But it is very minimalistic, which we want of course, but maybe too much.
... We need to write each topic/chapter names so that people can see what each requirement is about.

Dmitry: OK, I will fix that

Gunnar: We should also write some introduction text to topics.  Put in a paragraph or so at least.   If a particular topic is not covered in VIRTIO remember that we still need to put a placeholder title in there.

Gunnar: Asking the group generally: usefulness of specification? Are we still doing the right thing?
Franz: In some areas PikeOS has its own APIs and we do not use VIRTIO
Gunnar: Understood, and that's a choice anyone is free to make. To be clear we're not saying everything must be exactly according to VIRTIO, but of course other proposals must be laid out if they are going to affect standards work.

...Going through the table to review last week's discussion.
Gunnar. USB (repeat) Any device role? Device role? Anyone?

Gunnar: What are the use cases, you all work in real projects so you are the ones that might know of any.

Franz: I see mostly connection mobile phone, provide streaming video via hone.
Gunnar: That is normally still car in host role and phone in device role I believe.
Gunnar: Anyone else know of any case where car has device-role?
(none answered)

Gunnar: Artem, Updates?
Artem: Sorry been travelling. Will be more up to date next week.

Vasco (chat): Have to drop off...

Going through the table a bit more.  Mostly we need to collect and consolidate what has already been created.

Gunnar: Bernhard, updates or thoughts?  Your ARM colleagues have provided good input the last few weeks, for example about what lies in the future, i.e. what's still open topics in virtualization.
Bernhard: Sorry, back from vacation, also need to catch up on notes first.

Gunnar:    OK, no problem.  Let's reconvene next week with more energy.  We now have a good draft that will lead the way for other topics. 

From Tuesday, October 23 to date

iteration on the following wiki page content

• API standardization / virtual platform definition

Tuesday October 16, 2018

Participants

• Lars Kurth 
• Dmitry Morozov)
• Anup Patel
• Artem Mygaiev
• Kai Lampka
• Dmitry Morozov
• Gunnar
• Franz Walkembach
• Matt Spencer
• Vasco Fachin
• Alex Agizim

Apologies

• Bernhard Rill
• Philippe
• Sang-Bum Suh

Minutes

Quick de-brief

Gunnar: Questions coming up after ARM presentation?

Artem: No immediate questions from me.  Julien is main ARM Xen maintainer - he is reviewing the material.
...but it would be interesting if we can come up with a bit more use-cases than the one mentioned in the presentation.

Gunnar: Agreed, I'd like to extend that question to all the HV vendors.  Please give your opinion at a later meeting (on where you might like to use the secure execution modes).

Franz: It's generally a good whitepaper.  I believe it is quite heavily downloaded also.

Gunnar: Please discuss with all your technical experts in the companies about useage of this, since when we start thinking of usage maybe the ideas we then have will impact the API standards work.

Gunnar:  I guess we have crypto listed in our table.  That's one, but maybe more.

Artem: Yes, and that is our position [...that cryptography should be implemented in trusted execution environment].  Specifically TEE, should run in the TrustZone mode(s).

Gunnar: Going through the table to see where we stand.  Are all topics being covered. 
...can we bring any to some final conclusion.

... vIOMMU. 

Dmitry: some code proposals but for various reasons it seems it will not make it into mainline Linux.  Performance is slow.  But there are no known use-cases in Automotive?

 ... CAN

Franz has linked a virtio-can driver

Anup:  This is the frontend driver.  I believe the backend was implemented in XVisor but was never sent upstream to me.

(more discussion)

Artem:  I think we found little need to virtualize.   Actual CAN access is typically implemented in another CPU.  Perhaps for sniffing / logging purposes [but that's so simple that you don't need a full stack]

Gunnar: Yes, I have also mostly seen designs where there is a separate Vehicle Interface Processor, or at least a separate core on SoC.

Artem / others:  The conclusion might be that there is little need to virtualize CAN.  USB might be similar but on the other hand it supports virtualization.

Gunnar: Sure and this might be the conclusion...  I can imagine some chapters [in a virtual platform specification] would just make this conclusion and perhaps point to some reference (in this case virtio-can) if someone feels the need to go beyond that.

Continued general discussion

Lars: We should pick one or two easy ones and not try to reach the answer for each.

Gunnar: Agree, .  I'm asking about them here but mostly it is the intention of going through the list, to see where we stand...  to find simpler ones to start with.

Anup: I think watchdog is important and also Random Number Generator.   Virtio has a proposal for  RNG but not watchdog.

Gunnar: We might discuss RNG under "crypto" but it's not the only usage so let's just add it separately.  Everyone, feel free to add to the list!

GPU...

Gunnar:  I think we need to get Matti and Nikola together to finalize discussion on the feasibility of 3D API standards.  For 2D everyone seemed to agree that VIRTIO should work.  For 3D, I think there are nuances we need to cover.  It's never all or nothing - we should be able to find some common parts (API and/or code).

9pfs...

Gunnar / Lars / other discussing.  It seems we can wrap it up with the conclusion that we don't see a strong use in Auto/Embedded.  Gunnar: I'd be fine with that - we should cover the most common systems.  I would write an initial "chapter" on this as an example.  But that's mostly a "negative" example [i.e. documenting that it is out of scope].   Now we need also find a positive one, which is needed and where the API standard is decided. 

Lars: (For Xen) we only needed it to support running containers.   I don't think it plays a part in server virtualization since there are so many other network protocols like NFS (and the VMs communicate between each other using those).  As soon as you set up networking, any network filesystem protocol works. 

Gunnar: My perception is that [in relation to virtio] this is from VM to hypervisor/host, and that only makes sense in Desktop - VirtualBox/VMWare Workstation, etc.  As a standard I imagined NFS would be too big/complicated (to use as API to/from a hypervisor)

AI: All participants asked to:

 1. Come to a (personal) proposal for your section and document this (is VIRTIO adequate, what else is needed, etc.  The process that is mentioned on working page
 2. If we feel uncertain, e.g. must have more use-cases, write that down.  What is required for you to reach the point of 1.

Gunnar adjourned the meeting with the idea that today's discussion was preparing us for getting this done (starting with one or two simple 

AI (Anup): Pick a topic to lead.  A free one, or you can also add to one that already has a name.

October 11, 2018 - Tech summit working session in Bangalore, with phone conference

October 9, 2018 - No phone conference because of tech summit

Tuesday October 2, 2018

Participants

• Bernhard Rill
• Philippe
• Sang-Bum Suh
• Kai Lampka
• Anup Patel
• Artem Mygaiev
• Dmitry Morozov
• Gunnar

Discussing the tech summit

The overall plan for working session is at:

HVWS Workshop Schedule at Bangalore Tech Summit

A few people asked for a more exact agenda...

The first hour (10.30 CEST, if we have calculated correctly)
will be on GPU sharing.

At 11.30 approximately, switch to Security Block with ARM leading. Up to
45 minutes ARM intro/presentation, followed by Q&A / discussion

After that, follow-up topics.

(later in meeting) Kai offered to prepare some presentation on block devices.

Bernhard: What will be the planned for conferencing?
Philippe/Gunnar: Zoom is our assumed default. If we need to change to Skype or Hangout we will let you know. Details will be sent by Philippe.

Bernhard: We would like to have more questions in advance to cover in presentation.

Gunnar: Collecting at the bottom of this page  - please add to it!

Artem: We could discuss my questions on implementation of OPTEE and support for virtualization ARMv8 and prior...

Virtual Platform Definition:

Crypto

Gunnar: Can we start HSM discussion by evaluating crypto support topic listed in table? Sang-Bum?
Sang-Bum: I have too many other engagements. I will be busy until 20th October at least. Maybe after that.

Block devices

Gunnar: We have discussed various aspect I'd like to bring down to some concrete results. Let's document it. Is VIRTIO good enough or what is the remaining gap?

Kai: Still investigating more
... but I think VIRTIO is not concrete enough. I think it needs more specialized descriptions
...That's why I want to investigate the TRIM command to see how well it works.

Kai: Persistence mgmt (stack) is not fully sorted out. (Not clear where in the software stack you should do what). What about Transaction/Commit
semantics for storage?  Should that (API) be defined?

Gunnar: Experience from XVisor?

Anup: XVisor provides the VIRTIO block device standard and that's about it. 
...It's up to each system to decide
... Where/when can dedicated memory per VM be used (pass-through), and where not?

Kai: For cost reason, one chip per VM is usually not realistic

Anup: Agreed.

General

Anup: The virtual platform specification, will it need to define the exact memory layout \[for memory-mapped devices\]? QEMU basically does this...

... some discussion
... conclusion that presumably yes this is needed if a VM is going to be fully portable? Let's return to this question.

Next meeting in 2 weeks, (with the Tech Summit working session in between).

September 25, 2018

Minutes TBD

September 18, 2018

Participants:

• Anup Patel (XVisor)
• Nikola Velinov (Green Hills)
• Subramanian (Alpine)
• Artem Mygaiev (EPAM)
• Vasco Fachin (ADIT)
• Gunnar (GENIVI)
• Alex Agizim (EPAM)
• Bernhard Rill (ARM)
• Dmitry Morozov (OpenSynergy)
• Devendra T (KPIT)

Apologies:

• Philippe R
• Kai Lampka
• Matti (Opensynergy)
  
  

Agenda:

• XVisor introduction
• Tech Summit
• Sensors (if time)

Minutes:

• Some introductions.
  • Devendra joining from KPIT.
  • (later) Alex from EPAM
  • Anup: I work at Qualcomm as a server virtualization engineer.  XVisor is a side project.
    
    
  XVisor introduction:
  
  
• Anup: Hobby project at first (~2010). Could we run more than one RTOS on the CPU? Played around with minimal scheduler and were excited when it started to work.  It grew into this project.
  ... Interested in providing the minmial possible scheduling, avoiding complexity
  ... PowerPC first, then tried also MIPS
  ...Availability of hardware was a concern. Started with ARM eventually.
  ...Now we have ports for supporting the virtualization extensions.
• Gunnar: considered Intel support?
• Anup: Yes we have it - another person working on that but not me personally
• Anup: We also have some support for ARM architectures without built-in virtualization features. We patch the kernel, to remove certain "problematic" instructions with a hyper-call. So with some modification we can run RTOS and Linux on hardware w/o virt support. Not as good performance of course but still cool!
• Anup: Most people are familiar with Type-1/Type-2. But the word "Monolithic" might need clarification.
• Anup Walking through New/extended classification scheme. Details beyond the "Type 1/2" definition.
• Gunnar: Do the rest of you agree with the classification? It would be interesting to see other missing hypervisors categorized as well.
• Anup: We support VIRTIO for paravirt. Can remove drivers if not required, or create hybrid approach where some are pass-through
• Anup (presenting Xen slide)
• Artem: Not quite, backends will be in dom0 and in this case Qemu is not needed. But if you really want to use emulation then emulators will run on the hypervisor level.
• ...There are also peripheral emulators that can run on Xen level. Information in research paper from 2 years ago: running device drivers in Xen as a privileged application.
• ...You can go into privileged mode, effiectively switching back to ... directly run on execution level zero. Any type of emulator. Potentially unsafe device drivers can be run here. In most cases if you talk about PV model only then the picture is correct.
• ...Alternative, backend talks to backend with its own device driver model then QEmu not needed.
• Gunnar, discussing working session
• ... XVisor details and Q&A?
• Anup: I could prepare a few interesting questions. Memory handling...
• Gunnar: Security topic. I also think the task scheduling challenge is (forever) interesting.
• ... ARM TrustZone whitepaper
• Bernhard: There are ARM engineers that can introduce this. Just give me a more preciese time slot.
• Gunnar: Good.  Since we have many virtual participants and the logistics of a large room can be difficult, it's important that we organize the working sessions around a few presentations.
• Nikola: I would also like a more detailed time schedule
• Gunnar: Sure I can set that up, but remember you all need to provide input (topics) to actually create it.
• Gunnar: Are you familiar with ACRN?  We have not done any deep-dive into it on this project yet but I think we should at some point.  I think it's Intel only, but also follows a minimalist approach.  Might be worth for you to look at.
• Anup mentioning paper(s) behind XVisor.  Links will be sent to mailing list.  
  ...There is also a paper on TrustZone usage.
• Gunnar: That fits well since ARM presented TrustZone information to us recently.
• Gunnar: If you have additional topics for working session you can make a short intro - send me that proposal!

September 11, 2018

Participants:

• Kai (Elektrobit)
• Nikola (GHS)
• Sang Bum (Perseus)
• Subramanian (Alpine)
• Matti (Opensynergy)
• Christoph (ADIT)
• Vasco Fachin (ADIT)
• Gunnar (GENIVI)
• Philippe (GENIVI)

Agenda:

• Technical Summit sessions (Bangalore, 10-11 October)
• progress on actions: API standardization / virtual platform definition

Minutes

• Technical Summit sessions (Bangalore, 10-11 October)
  
  • calendar invite for the HV working session sent: session is scheduled on Thu 11 October 2pm-4:30pm local time / 10:30am-2pm CEST
• New participant
  • Christoph introduces his colleague Fachin who will take over ADIT participation to the HV project
• Progress on actions: API standardization / virtual platform definition
  • gpu sharing

September 4, 2018

Participants:

• Bernhard Rill (ARM)
• Artem (EPAM)
• Dmitry (Opensynergy)
• Kai (Elektrobit)
• Nikola (GHS)
• Sang Bum (Perseus)
• Guru (Bosch)
• Gunnar (GENIVI)
• Philippe (GENIVI)

Apologies:

Agenda:

• Technical Summit sessions (Bangalore, 10-11 October)
• Updates from Dmitry on GPU Sharing (operation)
• Discuss reference received from Bernhard (email)
• "New" (actually old) Hypervisor: XVisor project
• Discussing the format of the Automotive Virtual Platform specification (GA) (postponed)
  
  

Minutes

• tech summit
  • discussion on deep-dive topics for discussion in the HV working session: gpu sharing is an important topic to discuss
  • HV working session will be scheduled on Day 2 afternoon (11 October) to allow European participants to join by telco
  • Bernhard has sent an email introducing a white paper released by Arm which gives and insight into the architectural updates in Armv8.4 in the Trustzone:
    https://community.arm.com/processors/b/blog/posts/architecting-more-secure-world-with-isolation-and-virtualization

August 04, 2018

Participants:

August 28, 2018

Participants:

• Bernhard Rill (ARM)
• Artem (EPAM)
• Christoph (ADIT)
• Matti & Dmitry (Opensynergy)
• Kai (Elektrobit)
• Gunnar (GENIVI)
• Philippe (GENIVI)

Apologies:

• Nikola (GHS)

Agenda:

• Bangalore tech summit
• Device standards / VIRTIO continued

Minutes

• tech summit
  • discussion on tech summit content, we envisage doing remote presentations / discussions via video link
  • Artem: will bring some topics for discussion on the table
  • Opensynergy: Matti confirms he cannot join F2F, is asked to provide inputs
  • TODO All provide your inputs for deep-dive discussion by the end of this week
  • Gunnar: remind about the working session structuring: quick intro by topic owner and items for discussion
• technical work
  • review of device drivers work items
  • networking: Gunnar - we have an opening for it (i.e. we need someone)
  • discussion on gpu sharing
  • need to support Vulcan and opengl
  • Android space is getting the whole traction
  • Google is sponsoring the Vulcan work

August 14, 2018

Participants:

• Nikola (GHS)
• George Dunlap (Xen Project / Citrix)
• Lars Kurth (Xen Project / Citrix)
• Bernhard Rill (ARM)
• Artem (EPAM)
• Christoph (ADIT)
• Gunnar (GENIVI)
• Sriram (KPIT), second half of meeting
  
  

Apologies:

• Philippe, Sang-Bum, ...others

Agenda:

• Device standards / VIRTIO continued
• Bangalore tech summit

Minutes

Gunnar: Let's Re-introduce the VIRTIO/Device Driver/Virtual Platform definition project because of new/returning participants.

The intention is to write a virtual platform definition that can encompass the whole Automotive Industry.  So, supporting Linux & non-Linux operating systems (according to Industry
wishes). It would ideally support hypervisors developed with FOSS licenses and other models.

VIRTIO has been proposed as starting point. We're now evaluating each device type / topic:

- What is defined by VIRTIO
- What are the automotive Requirements
- Evaluate applicability and completeness. Clarify the gap.

Gunnar: First study has been on VIRTIO 1.0 but I have seen that there is
additional work ongoing. There is a git master...
Lars: Yes, a version 1.1 is planned. You should make sure to cover the
latest.
Gunnar: Agreed, action taken to steer our evalution towards git-repo master - if that's what is most appropriate?
Lars: I assume that's it, but I or George, could look into that.

George shares various experience from Xen project:
...VIRTIO was designed with KVM in mind first
...also for Xen we have found this to be a problem in some areas
...For example, it is assumed that QEMU (which provides the VIRTIO implementation when using KVM) has full access to all of the guest memory all the time.
...it is stated that VIRTIO devices bypass IOMMU completely.

George: In Xen we want to build features that do not match this, such as VM having control over which backends can write into its memory. We have a concept of Driver Domains, which adds security. A layer of security in case of bugs/vulnerability in implementation. For example something like a network card driver may be run in its own VM, with a well defined communication interface to the client VMs that use it.

Lars: Should we write down driver isolation as an automotive requirement?

Bernhard: Also, looking at the list of general considerations, please make sure to add Functional Safety

Artem: ... and Security

Artem: I see comments about implementation dependent things. Isn't the goal for GENIVI to implement standard implementations [that can be used by multiple parties?]

Gunnar: (paraphrased): Yes, this is a likely goal but it remains to be seen how this project progresses. We start with analyzing and defining requirements and specification. However, a specification needs implementation to prove
viability. This is GENIVI's experience since the beginning. Previous compliance programs, have always required _some_ software to prove for example an API specification is appropriate, before it becomes part of the specification.

Gunnar: For this project we have received input from, for example Green Hills, that [even independent of the question of porting VMs across different HVs], at implementation and quality maintenance of drivers is a
significant effort. So it seems many, including commercial HV vendors would benefit from more shared implementations too if it's feasible.

Nikola: Agreed. We will have to see [how much implementation can be shared] - such as... how much work is required to make VIRTIO implementation have high enough performance?

Comments From Nikola Velinov on the meeting notes: The shared implementation can serve as a a good reference for identifying the 'Virtual Platform' requirements on the actual virtualized device. It might not be the best approach to have the platform demand the usage of virtio. Rather it would be better if the 'Virtual Platform' defines requirements on the actual virtualized devices and points to the virtio standard as a reference of such in terms of the guest component. Performance for virtio in this case would not be as critical.

Bernard Rill: Have you [Xen Project] evaluated portability across architectures? ... I mean SW layers etc.

[ Discussion to understand how/if such standards are easy or hard to implement in diverse software. ]

Nikola: I would also agree. It is clear that VIRTIO came from a non-embedded starting point. Therefore need to figure out if it can be transformed towards better supporting embedded.

(... also some answer from Xen Project)

Gunnar: Interesting and important - please share such experiences by documenting/linking in the Wiki. We need to collect evidence and information to see the full picture. But I would like to steer the conversation back from "is this possible" more towards actually doing the required work now. (looking at table again)

Gunnar: Please volunteer for the topics that have no Champion yet.

Artem: Looking at Sensors... Aren't most sensors just providing an interface using some standard device class, such as serial? They rarely provide any particular HW support, so it's surely para-virt. So it is more
about defining a protocol. We have in fact defined some protocols, as part of XenPV work.

Gunnar: That might very well be the conclusion. Seems you have done half the work now  - can you add these thoughts to the Wiki, and then we check consensus later? I'll put your name down on Sensors

Artem is assigned to Sensors. He also volunteers EPAM for media acceleration topic.

... Also what about "data-intensive devices". Fast DMA/memory implementation.

Gunnar: I don't know. I guess the IOMMU topic will branch out into a wide discussion (It's all about memory handling).

Lars: I can't volunteer me or George at this time - need to check availability.

Lars: I saw no info about mailing list...

Gunnar: At current we use genivi-projects.  Butt we can set up a dedicated list.  What would be the group desire - to have a smaller list for intense discussion in the core group?   Because I thin to keep others informed, it would just be yet another list for them to subscribe to.

Lars: Genivi-projects should be OK.  It won't be too high volume.

Gunnar: OK, I will add clearer info to project page.

Lars: We might be interested in smaller focused meetings around some topics, bringing together for example Matti, George and perhaps Stefano.
Gunnar: No problem, we just arrange the meeting time for particular meetings.
Lars: OK, I will use the mailing list.

Lars: I think (VIRTIO) v1.1 has a deadline close to end of the year. We should check the window of opportunity to affect it.

Sriram: I have joined. I will study the Wiki page and VIRTIO specifications.

Lars: ...will be busy for the next 3 weeks or so. Open Source Summit and other things.

Summary of meeting and housekeeping.
Meeting adjourned.

August 7, 2018

Cancelled due to vacations

July 31, 2018

• Matt Spencer
• Bernhard Rill
• Kai Lampka
• Christian Schulenberg
• Stephen Lawrence
• Philippe
  

Agenda:

• preparation of the technical summit in Bangalore - 9-10 October

• Focus will be on HV project and Graphics Sharing project

• We intend to have a HV project readout on Day 1 afternoon (duration: 1h30) and a working session on Day 2 (duration: half-day). There will be a networking event on Day 1 evening.

• We need a critical mass of attendees already involved in the HV project to have a productive working session

• We would like to check who intends to attend the event (either personnally or through one of your colleagues based in India or elsewhere) and gather topics for discussion for the working session.

• there will be no big showcase at the technical summit (next big showcase will be at CES 2019), some demos might be shown though at the technical summit upon request
• Main topics for the working session will
  • device drivers standardization: it is important to make sure the virtio community is aware of the work done by GENIVI, for the next two weeks, it is expected that assignees (in the table at the bottom of API standardization / virtual platform definition
    will add description of device drivers, then starting mid-August, the HV project should start discussing how to coordinate with upstream projects (please look at Opensynergy presentation at ALS in June)
  • automotive use cases: for the time being we have been only through one use case (rear view camera), analysing a second use case should be at the agenda of the HV project after mid-August so that some results might be shown and discussed at the technical summit
    • TODO @Sriram any feedback on this ?
• in addition, participants are welcome to propose topics / problems to solve that could be debated at the working session
• next call is scheduled on Tuesday 14 August

July 24, 2018

• Frank

• Gunnar

• Matti

• Sang-bum

• Philippe
  

Agenda:

• API standardization / virtual platform definition 
  
  • Action for all: Look at list of devices (bottom). Continuation of allocation of device drivers description to participants

  • discussion on criteria

    • Matti: more detailed criteria for applicability of device drivers to automotive are needed, we need to formalize the criteria

    • Matti: the idea for FUSE came from 9pfs, FUSE is a modern linux version of a pseudo file system like 9pfs, it is a very interesting technology

    • Matti: one criterion is : is it standardized already ? is it implemented ?

      • example: CAN device driver is implemented but not standartized yet

    • another criterion is complexity (i.e. complexity estimate of the device implementation: for CAN all you need is a kernel implementing the CAN device class

• next two weeks will be dedicated tof filling the wiki page API standardization / virtual platform definition with content

July 17, 2018

• Frank

• Nikola

• Kai

• Philippe

• Gunnar

• Ralph

• Sang-bum
  
  

• Sriram Gopalan
• ...

Minutes

• Additional discussion about Virtual Platform Definition
• Kai has previously been "assigned as a volunteer"  for block storage.  And it was confirmed.
• Kai: Can we write down more than one person, a team of interested people?
• Gunnar: We can add more, but in my experience we need a topic lead to move things forward.  The lead can of course be involved in "recruiting" more people also...
  
• Gunnar asked Nikola, who selected Network devices & Ethernet (+AVB)
• Gunnar asked Frank, who accepted to look into USB - will discuss with other SysGo engineers.
• Gunnar asked Ralph.... Ralph will ask Matti to select some topics.
• Gunnar asked Sang-bum to cover some topic(s) based on his experience.  Sang-bum does not have time right now to evaluate a topic.
  
• Everyone needs to do the evaluation of their selected topic
  1. Write down / figure out the automotive requirements
  2. Read VIRTIO chapter
  3. Decide if VIRTIO is appropriate and complete for requirements (Gap Analysis)
  4. Write down steps to close any gap
• Action(All):  Assign yourself as "lead" for 1-2 topics and write it on the page.  Then perform the steps above.

July 03, 2018

Participants:

• Christoph Lipka
• Guru R
• Sang bum Suh
• Sriram 
• Nikola 
• Gunnar
• Philippe

Agenda

• *technical summit*, 10-11 October, Bangalore, India
• Milestones, deliverables, and workplan.
• API standardization – VIRTIO intro!

June 26, 2018

Participants:

• Christoph
• Sang bum
• Sriram
• Nikola
• Gunnar
• Philippe

Minutes

• Discussion on boot times...
  • Just for reference: 1 second Linux Boot example (old) (not snapshot or hibernation, if I recall correctly)
    "Real-world" might be different.
• Sang-Bum: <100ms hypervisor load is generally possible.  What is the requirement?
• /TODO/ Add Sriram's notes
• architecture proposed by Sriram at the bottom of this page  is aligned with the rear camera use case
• discussion on EVS (External Video System) on top of android
• discussion on Green Hills solution
• /TODO/ Nikola upload the diagram with a micro-kernel based RTOS architecture (with HV as a thin layer on top of RTOS)
• RTOS is responsible for the scheduling, HV is there to enable Linux
• Nikola: goto GHS website the GHS solution is fully described there
• Nikola; you do not need to boot the whole linux to get the rearview camera up & running, you need to boot only the rtos part
• Sang bum; would you require two video streams, one coming from rtos and the later another one coming form android or linux ?
• discussion on the handover of video streams

Sriram's notes - minor edits and formatting

(Camera use-case an architecture)

• Birds Eye View / Surround View could be possibly only implemented in the Android Partition and may not be available as part of early RVC
• Following are options for supporting such a use case through out the lifetime of a IVI session ( from startup to shutdown)
  • Everything in Vehicle domain ( Basic as well as advanced view ) => No handover / arbitration required with any other domain
  • Basic implementation in Vehicle domain + Advanced implementation in Linux/Android domain => Handover / arbitration of camera stream is required
  • Everything in Linux/Android domain ( Basic as well as advanced ) =>
  • Dedicated partition ( potentially a third domain besides Vehicle and Android/Linux domain) that does everything
• What are the implications for Hypervisor? 
  • Constraint as of today in Android : Cannot do early RVC within 2 seconds.. however that is on the roadmap
  • Linux does not have this constraint as it is completely Open Architecture and free from Compability aspects 
• Solutions for early camera systems
  • Snapshot / Hibernation speeds up boot and production solutions with < 2 seconds camera is possible
  • Example from a camera product( high end camera )
  • No safety aspects in consideration in the above example; non-automotive
• Load time of hypervisor ~ 100 ms

June 19, 2018

Agenda:

• VIRTIO intro
• Use Case → Architecture → Problem Statement → Results

Participants:

• Nikola
• Sriram
• Subramanian
• Christoph
• Gunnar
• ...

Apologies:

• Sang-Bum
• Matti
• Horst

Minutes

• The need for a shared vocabulary again
• Nikola: API standards like VIRTIO should apply to Type1/Type2 equally
  • Link VIRTIO 1.0
• Is libvirt implementation a useful addition to the plain specification? - is it really widely used? 
• Discussing project scope & results
  • ...
• Plan: Discuss use case per meeting
• Discussing rear-view camera case once more
  • E.g. long-booting kernel require another solution for camera
  • Common solution:  Bootloader → early-boot program runs camera → later on there is some type of hand-over
  • Gunnar: As discussed last week, a small core (on SoC) usually handle the wake-up scenario.  That in itself is not requiring a HV.  But what runs next is what we should discuss.
  • Nikola: A Type 2 HV can run processes (e.g. camera) separate from a large kernel.  It can continue running that in fact, so no hand-over required.
    • Also possible with Type-1 (which is assumed to be small), which runs a small partition for camera
  • Safety requirements.
  • Android have now published some of their early camera proposals → link?

June 12, 2018

Agenda:

• getting everybody updated
• review of critical use cases.

Participants:

• Kai
• Sang bum
• Berhnard (arm)
• Kevin
• Nikola
• Sriram
• Matti
• Franz
• Gunnar
• Philippe

Apologies:

• Christoph Lipka (ADIT), Albert (Conti)

Minutes

• question on cpu usage following a discussion with a car OEM
  • Sang bum: reports on a discussion on cpu consumption he had with an OEM
  • Gunnar: depends on types of ECU : ic or infotainment
  • Matti: most of systems are very much loaded because as soon as a system has spare capacity OEMs swap to a smaller chip because it costs less

• device driver virtualization
  • wiki page: https://at.projects.genivi.org/wiki/x/ZpT0
  • Matti: posted one hour ago a short intro on virtio in the above page
  • report on review comments on the wiki page postponed to next week

• use cases discussion
  • Sang bum: starts with a question about the use of Android os environment
  • Gunnar: Android has been used for several years w/o support asked from google and w/o certification in mind, now some oems are engaging more closely with Google and look for approval
  • Matti: agrees with Gunnar, Google is heavily pushing their techno into automotive and they will likely agree with the utilization of hypervisors
  • Sang bum: asked whether there is a need to dynamically load an OS (i.e. load android when you want to run an android application)
  • Sriram: this is an interesting requirement
  • Franz: multiplying OSes make things more complex when executing the project (3/4 parties need to manage the project which makes it difficult)
  • Matti: this cannot happen with Apple iOS because Apple has never offered iOS on an hw not designed by them
  • Matti: all other OSes could be loaded on demand, Windows might become something people would like to have, a rear set entertainment is not really automotive, it is rather a tablet, this is why Windows could come back in the landscape
  • [not captured for a couple of minutes]
• back on use cases
  • link: https://at.projects.genivi.org/wiki/x/WpP0
  • Nikola: comments on the challenges column of the table, some challenges are relevant to architecture rather HV technologies, would it be worth identifying them better ?
  • Sriram: yes, this would help
  • Sriram: shows diagram on architecture at the bottom of the page
  • Sang bum: how can SoCrun both linux and rtos w/o virtualization ?
  • Sriram: this is because modern silicon offered the ability to specialize cores  [capture is TBC], almost all infotainement systems were following this architecture up to now, but this is changing
  • Sriram will share more diagrams

• AOB
• Technical summit  - Fall 2018 (week starting on October 8, location: Bangalore, India)
  • Philippe: informs the group that the topics selected for discussion in the summit are related to graphics sharing and hypervisors
  • Sriram: coins the idea of inviting xviser, an HV open source project whose maintainer is based in Bangalore, can reach out to him for a possible presentation, link: http://xhypervisor.org/
  • Franz: what are the results we need to talk about ?
  • Gunnar: [not captured]
  • Kai: what would be the prerequisites to deliver a demo there ?
  • /TODO/ Philippe gather and provide info about the session schedule and space for demos at the Technical Summit
• Adjourned: 11:05am CET
• next week
  • review of Opensynergy inputs on virtual device drivers

June 5, 2018

Agenda:

• getting everybody updated
• review of critical use cases.

Participants:

• Albert Kos (Conti)
• Kai Lampka (EB)
• Christoph Lipka (ADIT)
• Franz Walkembach (Sysgo)
• Sriram (KPIT)
• Sang bum Suh (Perseus)
• Gunnar (GENIVI)
• Philippe (GENIVI)

apologies: Matti (Opensynergy)

Minutes

• getting everybody updated: we have currently 3 threads active
  • device driver virtualization (prepared by Matti)
  • AGL paper review (prepared by Nikola)
  • critical use cases (prepared by Sriram)
• device driver virtualization
  • Matti cannot attend today's call, got the clearance to provide his inputs, will upload them in the wiki today, topic for next week
• critical use cases
  • Sriram presents the critical use cases wiki page and his views on how APIs can be identified allocated in an instrument cluster context
  • Sriram: this is WIP, will add block diagrams
  • Sriram: details the assumptions and the use cases
  • Gunnar: we need to check how these use cases fit with the domain interacti
• more on use case / scenario #1 - Rear view Camera at Startup
  
  • Sriram: the rear view camera can be Ethernet connected, or LVDS connected, rather than analog cameras (converted to digital)
  • you still need to compose the camera output with the park assistant
  • it is a data stream available on a certain port
  • Ethernet  based cameras would be a good use case to start with
• discussion
  
  • Sang-bum: AGL paper talks about resource allocation on top of hypervisors (linux VM, Android VM)
  • Albert: we need to make a distinction between various partitions (safe, secure, others), it is a very complex landscape, IMHO that cannot be solved with one HV, first of all we have to focus on the safety critical part (Autosar based) based on type 1 HV and look at type 2 HV for other applications (e.g. linux containers, etc.)
  • Gunnar: we are not at this step of describing a solution using type 1 and/or type 2
  • Sang bum: we need to make a decision on our scope type 1 only and/or upper layers with sw virtualization
  • /TODO/ Albert provide a problem statement for next week (for instance on the rear view camera)
  • Kai: IMHO in order to be concrete with safety, we need to address ASIL levels which is a far-reaching goal, we should first focus on requirements like boot time and data throughput and latency bounds which current HV technologies have problem to comply with
  • Kai: most OEMS are a bit hesitating because they are not convinced HV will meet performance requirements
  • Sang bum: what about VMs on top of an HV ?
  • Kai: first need is to run legacy code and to have different sw islands to run them
  • Sang bum: IMHO para-virtualization is included in the scope of solutions
  • Sang bum: state of the art is that silicon supports virtualization, we do not need para-virtualization
  • Sang bum: in GENIVI we could runLMbench on linux on top of HVs and make performance measurements
  • discussion on performance benchmarking (for audio for instance)
  • Gunnar: this benchmarking is an industry effort, would start this by having this group agree on the method to do the measures
  • Albert: not sure, we did this benchmarking already
  • Sriram: I will add KPI to the use cases I have provided, we need to treat each problem statement, we have the right group to do the job
  • Sang bum: Android ? running on the fly of Android applications  is another use case, using this approach OEMs could avoid Google certification
  • Gunnar: asks every participant to provide his views in the wiki
  • /TODO/ All provide inputs on the various problem statements in the wiki page
• next week
  • review of Opensynergy inputs on virtual device drivers

May 29, 2018

Agenda:

• review of the summary of AGL paper prepared by Nikola .

Participants:

• Nikola Velinov (GHS)
• Sriram Gopalan (KPIT)
• Christoph Lipka (ADIT)
• Philippe (GENIVI)
• Gunnar (GENIVI)
• Sang-Bum Suh (Perseus)

Minutes

review of the summary of AGL paper prepared by Nikola
summary is short, everybody invited to read it
sections 3, 5 & 6 are the most relevant for HV project
section 3 can be adopted as a set of reference use cases
discussion on how we (as a GENIVI project) can build on the inputs from the AGL paper
Certain chapter should be reusable as they are, others with some modification.  Some chapters ahave useful content which should be quite widely applicable (multiple Linux, Yocto-based systems etc.) but the text cannot be used as-is since it uses a lot of specific language referring to "the AGL system", and similar expressions.

next week

• more feedback from other participants who did not attend today's call
• Opensynergy inputs on virtual device drivers (if internal go was given)

May 22, 2018

Participants:

• Kai Lampka (Elektrobit)
• Gayathri PP (Tata Elxsi)
• Matti Möll (OpenSynergy)
• Nikola Velinov (GHS)
• Sriram Gopalan (KPIT)
• Philippe (GENIVI)
• Gunnar (GENIVI)

Apologies

• Sang-Bum Suh (Perseus)

Minutes

API standardization
Matti started writing down thoughts.  Needs some approval on content

Matti introducing:

• Definition of the virtual platform...
• virtio as specified, and/or looking at defacto implementations e.g. in Linux 
• there are feature flags in the virtio spec - define which ones should be mandatory for automotive use case
• Then guests can be developed against this virtual platform – possible to run guest on any HV that fulfils the platform
  
  
• It's like "Virtual appliances"  used to be a popular concept.  Now containers/applications-containers, same principle.
  • Package certain software as a machine image. Deploy to cloud.
  • Before virtualization "appliance" is a box of where the software is running, then virtual-appl.
• This work in GENIVI could specify such a baseline environment that describes the set of devices.
• Can be done by referencing existing standards. 
• Agreeing on the subset of features that automotive requires - what is mandatory instead of optional.
• Example:  The discard capability of the block device. Is optional in virtio, but for embedded, this should be mandatory.
• Discard = Hinting to a flash device that something is not being used anymore.

Discussion:

• Nikola: Virtio standardizes a restricted set of devices only, e.g. GPU(?), what about the devices that are still in draft status.
• Matti: One option is to drive the virtio standards forward (to fill those gaps)
  ... the other is to just say we shall be compatible with current implementation (in Linux)
• Nikola: agrees with Matti's proposal
• Nikola: I'm interested in how to ensure compatibility/compliance to what we define.
• Gunnar: Driving virtio from draft to specific ("work upstream"), specify gaps, and promote that we support a particular defacto defintion.  All of those activities help drive standards forward.
• Matti: Plugfests is an option, such as has been done for Bluetooth. (for ensuring compatibility, and also driving standards forward)
• Kai: How much functionality should go into (virtio) driver vs (low-level) device driver part.
• Kai: How to handle non-open implementations (hardware specific low-level driver) etc?
• Matti: VirtIO should abstract those details typically. We should help to define that.
• Kai: HVs allow for Central device driver management which is useful, it can enforce certain policies. 
• Matti: I agree.  Example: block-write rate limiting
• Sriram: What about Type 1 vs Type 2. For example using KVM, having a full Linux kernel can be very useful. Type 2 approach enables more possibilities that bare metal 
  implementation. Also look at Xen. Why don't we look at those.  Maybe also go back to requirements first.
• Gunnar: All of those technologies are also represented in our group, (and some might even consider themselves to be their own type). [Thin layer HV and RTOS based, etc.]
  Virtual Open Systems work on KVM for example, and others are strong on Xen.  I don't right now see a reason to limit to one type. 
• Several: Requirements can help clarify what is needed.
• Gunnar: I think we should drive those things forward also. I called it a separate workstream but I don't want to create boundaries. I think these things are very related. The only thing is, we won't stop one track (API standards) that we already started, in order to go back to the foundation. I think we can progress this in parallel now.
• Sriram: I have some use cases I'm thinking about, I could write them down.

Additional thoughts from participants.

Wrapping up

Action Items

• Nikola study and summarize AGL whitepaper, in particular looking for basis for defining "the virtual platform", and of course requirements, use-cases, etc.  Use Wiki page to summarize.
• Sriram - Write down cases / concrete architecture examples / specific challenge (such as, audio startup&latency in a particular architecture)

May 15, 2018

No posted minutes

May 8, 2018

Minutes

Discussion on – see the title Device Standardization on main page: Hypervisor Project

Sang-Bum:  Hypervisors need to include a mandatory access control features
Matti: But in theory guests can run without ever speaking to a hypervisor.
Matti: It is difficult to standardize APIs to speak to the hypervisor itself - easier to standardize device driver layer.

Sang-Bum: We need to add a security architecture to control (negative) impact from one guest to another.  We need MAC support APIs to achieve that.

Matti: I would like to start the standardization topic by writing down a proposal.l

April 19, 2018
(Full-day All Member Meeting Workshop)

Please see the Hypervisor Workshop Schedule at Munich AMM page for schedule, speakers, participants and meeting minutes.

April 10, 2018

Further preparations of AMM agenda

April 3, 2018

Participants

• Ajmal  (Tata Elxsi)
• Artem Mygaiev (EPAM)
• Gayathri PP (Tata Elxsi)
• Ralph Sasse (Opensynergy)
• Guru (Bosch)
• Christian (BMW)
• Nikola (Green Hills Software)
• Franz (Sysgo)
• Gunnar Andersson (GENIVI)
• Philippe Robin (GENIVI)
  
  

Apologies

• Sang-bum Suh (Perseus)

Minutes

• Notice / presentation of new participants:  Nikola (Green Hills Software).  And previous participants now with opportunity to present themselves:  Ajmal and Gayathri PP (TataElxsi) 
• Continuation of the assignment of topics preparation with the participants, the topics and assignments for the workshop are listed under Hypervisor Project.

March 27, 2018

Participants

• Ajmal  (Tata Elxsi)
• Alex Agizim (EPAM)
• Artem Mygaiev (EPAM)
• Gayathri PP (Tata Elxsi)
• Horst Saier (Mentor)
• Matti Möll (OpenSynergy)
• Raj
• Sean Park (LGE)
• jithin (Tata Elxsi) ?
• Subramanian (Alpine)
• Stephen Lawrence (Renesas)
• Gunnar Andersson (GENIVI)
• Philippe Robin (GENIVI)
  
  

Apologies

• Sang-bum Suh (Perseus)

Minutes

• Gunnar tried to get contact with TataElxsi participants but still no audio coming through (microphone not working)
• Continuation of the assignment of topics preparation with the participants, the topics and assignments for the workshop are listed under Hypervisor Project.

March 20, 2018

Participants

Philippe Robin (GENIVI)
Sang-bum Suh (Perseus)
Matti Möll (Opensynergy)
jithin (TataElxsi)
Gunnar Andersson (GENIVI)
Christian Schulenberg (BMW)
Subramanian (Alpine)
Gayathri PP (Tata Elxsi)
Stephen Lawrence (Renesas)
Ajmal  (Tata Elxsi)

Minutes

• Gunnar tried to get contact with TataElxsi participants but still no audio coming through (microphone not working).
• Gunnar reviewed the assignment of topics preparation with the participants, the topics and first assignments for the workshop are listed under Hypervisor Project.

March 12, 2018

Participants
Philippe Robin (GENIVI)
Gunnar Andersson (GENIVI)
Sang-bum Suh (Perseus)
Christian Schulenberg (BMW)
Horst Saier (Mentor)
Subramanian (Alpine)
Guru (Bosch)

Minutes

Gunnar highlighted some of the topics for the workshop listed under Hypervisor Project.

Sang bum: introduced the workshop to LGe, Hyundai and Access in the recently hold Korea REG F2F, would like to collect their opinion so that we can share at the workshop
trying to contact xen so that they give a presentation at the workshop on their automotive projects, intends to contact redhat with is leading virtio
Sang bum: contact with car oem and tiers 1, my personal opinion is they do not know yet what it is the exact case to usefully apply HVs to a vehicle, in the process of trying to convince car OEMs to deliver market scenarios, coins the idea of sending a questionnaire to car oems
Sang bum will share an initial questionnaire with us at the next meeting (20 March)
Horst: my interest lies rather in graphics sharing
Gunnar:graphics will be one of the topics of the workshop
Horst: how to share graphic buffers, is a solution available in the open ? it is currently very silicon vendor dependent
Gunnar: Horst Saier can you a short intro in the workshop about it ?
Gunnar: @sang bum: are you familiar with gpu sharing ?
Sang bum: yes, I am very familiar, the problem is that silicon vendors except Intel do not publish the code of the drivers for gpu sharing
short discussion on audio virtualization
Sang-bum: would like to discuss device driver architecture at the workshop
Sang-bum: will propose a list of topics for Wed 14 March EOB
Christian: we are very interested in the market survey and what is available from vendors

March 6, 2018

Participants

• Guru (Bosch)
• Albert (Continental)
• Christoph (ADIT)
• Christian (BMW)
• Gunnar (GENIVI)
• ... maybe someone else - not sure

Minutes

We simply discussed and filled in the topics under Hypervisor Project.  Discussion much driven by Albert and Christoph.

February 27, 2018

Participants

• Albert / Continental
• C. Gouma / Sysgo
• Fabien H / Valeo
• Gayathri PP
• George
• Karthikeyan R
• Marco R / Mentor
• Matti Möll / Opensynergy
• Philippe / GENIVI
• sbsuh
• Stephen L / Renesas
• Swaminathan G
• Gunnar / GENIVI

Minutes

• Introductions
  • Gunnar tried to get contact with Ajmal, Gayathri, Karthikeyan, George, and some others but no answer.
    • Apparently there were microphone troubles all around
• Purpose/idea and organization history of Hypervisor initiative
  • Seoul AMM activities October 2017
  • Discussion & Preparing
  • "Do it right" - i.e. start only when/if significant interest
  • New developments – new lead (Sang-Bum)
  • Workshop at AMM  lots of interest - time to start planning agenda
• Started the topic list under Hypervisor Project - minutes
• Requirements need - OEMs usually don't give HV related requirements - they are more functional.
• Could we create some kind of (shared) Baseline requirements for HV vendors?
• (Sysgo): I do not believe in any kind of open source solution...
  
  • ... to solve Level 2 [or higher] autonomous driving... 
  • ... the code base is too big
• Gunnar: ... making a note that code base size is independent of code license
• (someone): We need to know which devices are important (for OEMs) 
• (someone): We expect safety requirements to be provided
• Albert:
  • Need to listen to the voice of customers
  • case studies
  • safety issues
  • 26262  - many are not familiar
  • difference in needs between IVI (not safety critical) vs cluster (is safety critical)
• accelerate towards (some kind of) safety approval
• HV solutions have been deployed (to solve this) not only in automotive - in aviation at least 5 years ago

an white paper released by Arm which gives and insight into the architectural updates in Armv8.4 in the Trustzone:
https://community.arm.com/processors/b/blog/posts/architecting-more-secure-world-with-isolation-and-virtualization